Visor - Shark SPARTAN CARBON Manual Del Usuario

A
B
C
D
AUTO SEAL - SUN VISOR
QRVS System
DISMANTLING.
Raise visor in the upper position (A).
Exerting a traction on the side of the visor (B).
Repeat the operation on the other side.
This visor has a system of easy disassembly without tools,
allowing you to clean it easily.
ASSEMBLY.
Place the visor face to the helmet.
Place the visor hooks in the side flanges (C).
Exerting a homogeneous pression on both sides (D).
WARNING! If you are not sure that you properly re-
placed the visor, do not use the helmet. The visor could suddenly
and without warning become detached from the helmet while
riding, causing you to lose control of your motorcycle, resulting
in an accident, personal injury, or death.Contact your retailer for
any assistance or advice. Do not ride with an open visor and
do not try to open or adjust the visor while riding. The visor
could suddenly and without warning become detached from the
helmet, leaving your eyes and face unprotected. In addition, your
head could be pulled to the side, causing you to lose control of
your motorcycle. These events could cause you to lose control of
your motorcycle, resulting in an accident, personal injury or death.
WARNING! Tinted or dark visors should never be
used at night or under poor visibility conditions as they reduce
your ability to see. Never ride with a fogged visor.
WARNING! If your visor no longer provides you with
clear visibility after a period of service, you must immediately re-
place it. Never ride if your visor is scratched, dirty, foggy or with
your vision obscured in any way. Always ride with perfect visibility.
AUTO SEAL
Your helmet SPARTAN has a patented system SHARK "AUTO-
SEAL". This system ensures a perfect sealing of the visor by clin-
ging the visor on the seal, by spring effect backward the visor
when it is in lower position
9