Maintenance & Care - Price Pfister BIXBY 538 Serie Manual De Instrucciones

16
16A
16B
16C
16 SPRAY HEAD INSTALLATION
Assemble Spray Head (16A) to Pullout Hose (16B) by turning the metal Hose Fitting
(16C) clockwise.
Caution: do not over tighten!
FAUCET FUNCTIONS
17
17A
17 SPOUT FUNCTION
The Spout (17A) can be rotated from side to side.
18
HOT COLD
18A
18 VALVE FUNCTION
By lifting Lever Handle (18A) up, the valve will be activated allowing water to fl ow.
The water fl ow will increase by continuing to lift up Lever Handle (18A). By rotating
Lever Handle (18A) counterclockwise, the water temperature will decrease to fully
cold. By rotating Lever Handle (18A) clockwise, the water temperature will increase
to fully hot.
ENGLISH
ON
18A
19
19 PULL-OUT OPERATION
The Pull-Out Hose (19A) can be pulled forward to spray water in any direction.
20
20 SPRAY OPERATION
To activate the spray mode, simply press Toggle Button (20A) located under the spray
head. You can change between spray and stream by pressing the opposite sides of
the Toggle Button (20A/20B) while the faucet is in operation.
Note: The faucet will always turn on in regular stream mode.
MAINTENANCE & CARE
21
21E
21D
21C
21 AERATOR CLEANING
Over time, the aerator in your faucet may become clogged with debris. To clean, unscrew
Aerator (21A) from Spray Head (21B) using a 7 / 8 " open ended wrench or adjustable
wrench. Separate Aerator Housing (21C), Aerator Basket (21D), and Flat Seal (21E).
Once parts have been cleaned, reassemble by reversing these steps.
5
19A
20A
20B
21B
21A