Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
DRAIN BODY INSTALLATION
15
15A
15 POP-UP INSTALLATION
Install and adjust Pop-Up (15A) using separate instructions supplied with the Pop-Up
assembly.
16
16 UNIT START UP
Turn on hot and cold water supplies, and check for leaks above and below the sink.
FAUCET FUNCTIONS
17
HOT
OPEN
17 FAUCET FUNCTION
COLD valve: close-counterclockwise, open-clockwise; HOT valve: close-clockwise,
open-counterclockwise. .
Note: Flush faucet before turning on valve (see step 18).
ENGLISH
COLD
OPEN
5
MAINTENANCE & CARE
18
18A
18B
18 FLUSHING & AERATOR CLEANING
After installation is complete, remove Aerator Cartridge (18A) by using Removal Tool
(18B). Turn Valves (18C) on and allow both hot and cold water to run for at least one
minute each. While water is running, check for leaks. Clean Aerator Cartridge (18A).
Once parts have been cleaned, reassemble by reversing steps.
19
19A
19 HANDLE REMOVAL
Turn off water supplies and relieve pressure before working on your faucet (see
step 2). Remove Handles (19A) (see step 11).
18A
18C
19A
Publicidad
Tabla de contenido
