LIQUID CRYSTAL DISPLAY (LCD) INDICATORS
THE TRUTH
features a Perma Focus monocular optical system for viewing your target. A liquid crystal display
™
(LCD) is mounted within the optical system and when activated, displays unit of measure, a reticle for targeting, when
the laser is actively firing, when a target has been acquired, and a battery life indicator. Inherent in the manufacturing
process are small black spots that appear in the optical system. These are a natural characteristic of the LCD and
cannot be fully eliminated in the manufacturing process. They do not affect the distancing performance of the unit. A
summary of these features is presented below.
UNIT OF MEASURE OPTIONS
can be used to measure distances in yards or meters. The unit of measure
THE TRUTH
™
indicators are located in the lower right portion of the LCD. To select your preference (Y or
M), start by pressing the power button briefly to turn on the display. While looking through
the eyepiece, hold down the Plus OR Minus button on the side of the unit for a few seconds
until the display changes to "SET" (right). Press the Plus or Minus button to toggle back and
forth between Yards and Meters. Once your desired unit of measure is displayed, press and
release the power button 3 times (or proceed to calibrate for your bowsight-see pages 8-9). The
device will return to the last unit of measure setting used each time the unit is turned on.
RETICLE FOR TARGETING OBJECTS
Place the aiming circle (located in the center of the field of view) upon a target at least 7 yards away, depress and hold
the power button down until the range reading is displayed near the bottom of the in-view display.
ACTIVE LASER
Crosshairs surrounding the aiming circle indicate that the laser is being transmitted. Once a range has been acquired,
you can release the power button. The crosshairs surrounding the circle will disappear once the power button has been
released or a distance has been displayed (i.e. the laser is no longer being transmitted).
7