Leica RANGEMASTER 2700-B Manual De Instrucciones página 57

C. Inserting / Removing the memory card
into / from the Leica Rangemaster
D. Opening the ballistic curve from the
memory card
If a memory card with a ballistic curve is inserted
into the Leica Rangemaster, it can be selected just
as described under "Setting the ballistic curve" on
p. 49.
• After pressing the main button
fi rst in this case. If a distance measurement is
subsequently performed, the following warning
messages may appear:
– if the
Err1 bALL
memory card is removed, defect or nonread-
able. In this case,
– if there is no ballistic curve on the
Err2
memory card.
– if the ballistic curve on the memory card
Err3
does not contain correct data. The following
procedure corresponds to the one for the
programmed ballistic curves.
Continued on next page.
2
appears
CArd
menu was selected, but the
also disappears.
CArd
EN
55