Tabla De Contenido; Machine Information; Safety Instructions - Ferm TDM1025 Traducción Del Manual Original

BENCH PILLAR DRILL
Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of Europe's leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive warranty.
We hope you will enjoy using this product for many
years to come.
The numbers in the following text refer to the
pictures on page 2 - 4
Read the operating instructions carefully
before using this device. Familiarise
yourself with its functions and basic
operation. Service the device as per the
instructions to ensure that it always
functions properly. The operating
instructions and the accompanying
documentation must be kept in the
vicinity of the device.
Contents
1. Machine information
2. Safety instructions
3. Assembly
4. Operation, hints and tips
5. Maintenance

1. Machine information

Technical specifications
Voltage
Frequency
Power consumption
No load speed
Number of speeds
Chuck capacity
Weight
Lpa (Sound pressure level)
Lwa (Sound power level)
Vibration
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardised test given in EN
61029; it may be used to compare one tool with
another and as a preliminary assessment of
exposure to vibration when using the tool for the
applications mentioned.
Ferm
- using the tool for different applications, or with
different or poorly maintainted accessories,
may significantly increase the exposure level.
- the times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level.
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns.
Product information
Fig. A
1. On/off switch
2. Drill depth gauge
3. Protection guard
4. Motor
5. Drill depth lever
6. Table adjustment
7. On/off switch for laser
8. Laser
Check first whether or not the delivery has been
damaged by transport and/or whether all the parts
are present.

2. Safety instructions

Explanation of symbols
The following pictograms are used in these
instructions for use:
230 V~
50 Hz
350 W
580 - 2650/min
5
13 mm
18 kg
62 dB(A) K=3
75 dB(A) K=3
<2.5 m/s
2
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Indicates the presence of an electrical
voltage.
Immediately unplug the plug from the
mains electricity in the case that the cord
gets damaged and during maintenance.
Keep bystanders away.
Caution: Laser beam! Do not look directly
into the laser beam. Do not point the laser
beam at humans or animals.
EN
5