Ideal Test Pro 360 Serie Manual De Instrucciones página 2

WARNING! (cont.)
7. Before breaking a circuit for testing, turn off the power to
the circuit. When disconnecting from a circuit, discon-
nect the hot lead first, then the common lead.
8. Disconnect the meter from the circuit before turning off
any indicator, including motors, transformers,and sole-
noids.
Overload Protection
V + V 200mV range
AC DC
>200mV range
A + A mA input
AC DC
10A input
Ohms (Ω)
Diode
Continuity
Unit of Measure Multipliers
For your reference, the following symbols are often used to
make measurement easier:
Symbol Verbal
M mega
K kilo
m milli
µ micro
To Measure AC Voltage:
1. Plug the test leads into the meter inputs as indicated in
the diagram below.
2. Select the proper range to be used within the VAC area.
3. Connect the meter in parallel with the load or circuit.
4. Measure AC voltage.
Page 3
500VDC/350VAC
for 15 sec
600VDC/600VAC
0.5A/250V
10A/600V
500VDC/500VAC
500VDC/500VAC
500VDC/500VAC
Multiplier
X1,000,000
X1,000
÷1,000
÷1,000,000
AC VOLTAGE
Meter Setup:
Red
Black
Function Range Resolution
AC Voltage 200.0 mV .1 mV
2000 mV 1mV
20.00 V .01 V
200.0 V .1 V
600 V 1 V
To Measure DC Voltage
1. Plug the test leads into meter inputs as indicated in the dia-
gram on the next page.
2. Select the proper range to be used within the VDC area.
4. Connect the meter in parallel with the load or circuit.
5. Measure DC voltage.
DC VOLTS
Meter Setup:
Red
Black
Circuit Connection:
Accuracy
50 to 500Hz
≤ 20 V range ±(1% +4)
≤ V range ±(1.5% +4)
Circuit Connection:
Page 4