BH FITNESS H853 Instrucciones De Montaje página 16

ASSEMBLY INSTRUCTIONS
For the assembly of this unit, we
recommend the help of a second
person.
Take the unit out of its box and make
sure that all of the pieces are there
(Fig. 1)
1. (1) Main frame; (2) Front post tube;
(9) Rear main frame; (6) Seat tube; (4)
Right handlebar, (5) Left handlebar; (3)
Front handlebar; (8) Slide tube; (11)
Front stabilizer; (10) Rear stabilizer;
(19A) Seat; (18)
Backrest; (29) Right rear cover; (30) Left
rear cover; (15) Adjustable bar; (33)
Right upper rear cover; (34) Left upper
rear cover; (31) Right lower rear cover;
(32) Left lower rear cover; (35) Front
cover; (20) Pedals.
Hardware pack containing:
(78) Bolt M8x55; (69) Spring washer
M8; (65) Flat washer M8; (53) Knob;
(76) Bolt M8x40; (57 for H853)
Tension control; (52) Knob; (91 for
H853) (94 for H854B) Clamp cover;
(91 for H854B) Adapter; (90) Bushing;
(88) Screw M4x25; Wrenches.
1. (16) Main body; (129) Right pedal
marked with letter (R); (129) Left pedal
marked with letter (L), (3) Main post,
(127) Post
Handlebar; (1)
Handlebar cover, (113) Front stabiliser
bar; (121) Rear stabiliser bar; (102)
Backrest, (126) Saddle; H857(130)
Adapter.
Hardware pack containing:
(144) Flat washer D8x16; (142) Slot
head bolts M8x16; (141) Slot head
bolts M8x12; (139) Spring washer D7;
(140); Bolts M7x30; (138) Washer D7;
(143) Allen Screw M8x16;
Washer D8xD19; Allen key; 2 Mixed
Hexagonal spanner.
Console;
bottom cover,
Monitor;
2. Remove the pre-assembled bolts
(77), washers (66) and (65) from the
rear main frame (9). Attach the rear
main frame (9) to the main frame (1),
Fig.2, and refit the bolts (77), washers
(66) and (65). Tighten securely.
3. Take the rear stabilizer bar (10) and
position it on the machine's rear stand
bracket support (9) as shown in Fig.3,
insert bolts (78), fit the washers (65)
and (69) and tighten securely.
Take the front stabiliser bar with wheels
(19B)
(11) and position it on the machine's
front stand bracket support (1), as
shown in Fig. 3, insert bolts (78), fit the
washers (65) and (69) and tighten
securely.
4. FITTING THE PEDALS
The assembly instructions for the
pedals must be followed to the letter,
fitting these incorrectly could damage
the screw thread on either the pedal or
the crank.
Right and left refer to the position that
the user adopts when sitting on the
saddle to do the exercises.
The right-hand pedal (20R), marked
with the letter (R), screws onto the
right-hand crank, also marked with an
(R), in a clockwise direction. Tighten
(9)
securely, Fig. 4).
(128)
The left-hand pedal (20L), marked with
the letter (L), screws onto the left-hand
crank, also marked with an (L), in an
anti-clockwise
securely, Fig.4.
Once the pedals have been fitted,
insert the end of the pedal clip into the
slot on the pedal adjusting it to your
footwear on the ledge of the pedal.
(136)
16
direction. Tighten