GB
IRL
Assembly
2. Screw the spray line [4] tightly into the outlet port [10].
Note the location of the spigot in order to be able to insert the lock.
3. Insert the lock [11].
4. Screw the spray lance [7] onto the shut-off valve [9]
Checks
Visual inspection:
Are the tank [1], pump [2], spray line [4] with shut-off valve [9], pressure gage [16] and
spray lance [7] undamaged?
☞
No leaks:
Pump up the empty device to 2 bar.
Function:
Pull the red button on the safety valve [12].
Activate the shut-off valve [9]
Making preparations
Observe the instructions in the section entitled "Safety".
1. Pull up the red button on the safety valve [12] until all excess pressure is released from
the tank.
.
2. Press the pump handle [13] down and turn it counterclockwise.
3. Unscrew the pump [2] from the tank [1].
☞
☞
4. Add the spraying liquid to the tank [1]
All excess pressure must be released from the device.
☞
6. Screw the pump [2] into the tank [1].
7. Swivel in the pump holder [8].
AUS
USA
.
.
.
15
NZ
.
.
.
.
.
.
CDN
IND
.