Operation (Use Of The Door) - Novoferm NovoSpeed Flex Manual Del Usuario

English user manual
8 Operating and using the door
EN
A faulty door can cause injuries or damage
objects. Use the door only when it does not
indicate faults or errors.
Persons can be injured or objects damaged
by the door movement.
Make sure that when the door moves,
•
there are no persons or objects within
the range of the door.
• Do not grab the column or the top roller
when the door is in motion.
Never place objects against the door
•
panel or against the top roller.
Do not attach any components to the
•
door panel which could make the door
panel heavier or thicker
Never use the door to lift persons or
•
objects.
+++ WARNING +++ WARNING +++ WARNING +++
The control system enables a number of diffe-
rent operating modes:
Dead-man switch OPEN [↑] /
8.1
Dead-man switch CLOSE [↓]
Keep the [↑] button pressed to open the door
until the OPEN end position is reached, or stop
the movement of the door by releasing the button.
To close the door, keep the [↓] button pressed
(dead-man switch) until the end position is
reached. The door stops closing immediately if
the [↓] button is released when the door is
closing.
6
This user manual must be given to the customer and must be kept within easy reach during the entire period of use.
Warning
8.2 Impulse OPEN/Dead-man button CLOSE
Briefly press the [↑] button or use the external
impulse emitter to open the door until the
OPEN end position is reached or press the []
button to stop the opening of the door. Press the
[↑] button to open the door further. Keep the
[↓] button pressed (dead man button function)
to close the door until the door end position is
reached. Releasing the [↓] button when closing
the door will immediately stop the closing of the
door.
8.3 Impulse OPEN / Impulse CLOSE
Briefly press the [↑] button or use the external
impulse emitter to open the door until the
OPEN position is reached or until button is
pressed again to stop the opening of the door.
Briefly press the [↓] button to close the door
until the CLOSE end position is reached.
A closing side protection (menu 35) must be
reached to activate this operating mode.
When the closing edge protection is activated
during the closing movement, the door will stop
closing and reverse the direction of the movement.
Activating this protection during the opening of
the door does not affect the door movement. In
the event of a failure, the door can be closed
using the [↓] button.
8.4 AR operation
Briefly press the [↑] button (or use the external
impulse emitter) to open the door until the
OPEN position is reached or until the [] button
is pressed to stop the opening of the door. Once
the set open time expires, a warning period is
timed during 10 seconds after which the door
closes automatically.
If the [] button is pressed when the door is in
the OPEN position or when CLOSING, the door
remains in the current position until another
impulse is emitted.
If menu 36 is set to "5" or "6", the door stops
during the movement of the door. The door open
timer is again started.