Downloading The App - Klein Tools ET16 Manual De Instrucciones

ENGLISH
FEATURE DETAILS
BACK
1. Camera LED Brightness Control
2.
10 ft. (3.05 m) Gooseneck
3.
Camera
4. Camera LEDs
5. USB Type-C Connector
6.
Micro-USB Connector/Adapter
NOTE: There are no user-serviceable parts inside.
4
FRONT
2
3
4
5
SYMBOLS ON BACK OF INSTRUMENT
Warning or Caution
NOT insulated - Will
NOT protect against
electric shock
Do not probe
moving machinery
WEEE –
Electronics disposal

DOWNLOADING THE APP

The ET16 app is required for functionality. The app is available for free
from kleintools.com on the ET16 product page, under DOWNLOADS.
CONNECTING YOUR DEVICE TO THE BORESCOPE
1. Turn on your device.
1
2. Connect the appropriate USB connector on the borescope to your
device, i.e., if your device uses a USB-C connector, insert the
USB-C connector
a Micro-USB connector, make sure the Micro-USB Connector/
Adapter is fully seated over the USB-C connector
6
insert the Micro-USB connector
FEATURE DETAILS section.
3. Select the Klein Tools Borescope app on your device. The ET16
will be recognized and begin drawing power from the device's
battery. At this point the Camera LEDs
Rotate the Camera LED Brightness Control
brightness and/or turn the LEDs off.
NOTE: The app will open in Display mode, with the camera displaying
an image.
6
Wear approved
eye protection
Read
Instructions
Conformité Européenne:
Conforms with European
Economic Area directives
OPERATING INSTRUCTIONS
directly into your device. If your device uses
5
into your device. See
5
will become operational.
4
, then
5
to control the
1
5