Safety Instructions; Electrical Connection - Progress PDV9175B Manual De Instrucciones

54 Progress
Do not flambé under the appliance.
•
Do not use to exhaust hazardous or explosive materials
•
and vapours.
Clean the appliance regularly with a soft cloth to prevent
•
the deterioration of the surface material.
Do not use a steam cleaner, water spray, harsh abrasive
•
cleaners or sharp metal scrapers to clean the surface of
the appliance. Use only neutral detergents.
Clean grease filters regularly (at least every 2 months) and
•
remove grease deposits from the appliance to prevent the
risk of fire.
Use a cloth or brush to clean the interior of the appliance.
•

SAFETY INSTRUCTIONS

Installation
WARNING! Risk of injury,
electric shock, fire, burns or
damage to the appliance.
• Only a qualified person must install this
appliance.
• Do not install or use a damaged
appliance.
• Follow the installation instructions
supplied with the appliance.
• Always take care when moving the
appliance as it is heavy. Always use
safety gloves and enclosed footwear.
• Before installing the appliance remove
all the packaging, the labelling and the
protective film.
• Do not install the exhaust air into a wall
cavity, unless the cavity is designed for
that purpose.

Electrical connection

WARNING! Risk of fire and
electric shock.
• All electrical connections should be
made by a qualified electrician.
• Make sure that the parameters on the
rating plate are compatible with the
electrical ratings of the mains power
supply.
• If the symbol (
rating plate, the appliance must be
earthed.
• Always use a correctly installed
shockproof socket.
• Do not let the electricity mains cable
tangle.
• Do not use multi-plug adapters and
extension cables.
• If the mains socket is loose, do not
connect the mains plug.
• Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.
• The shock protection of live and
insulated parts must be fastened in
such a way that it cannot be removed
without tools.
• Make sure the appliance is installed
correctly. Loose and incorrect electricity
mains cable can make the terminal
become too hot.
• Connect the appliance at the end of the
installation. Make sure that there is
access to the mains after the
installation.
Use
WARNING! Risk of injury,
burns and electric shock.
) is not printed on the