Rear Panel - D.A.S. DSP-26 Manual De Usuario

OPERATION
A 12dB/ Octave low shelving type has been chosen and there are currently 26 spare DSP filters still
channels.
EQ Frequency
The frequency of the EQ is adjustable from 15Hz to 16kHz in approximately 1/6 Octave steps. The
screen below shows that this is the first EQ on Output 2 ( labeled as 'High'). It has a frequency of 1kHz.
If using a Low Shelving filter this would be the 3dB point.
EQ Cut/Boost
Selectable gain from -15dB to +15dB in 0.5dB steps. Setting an EQ cut/boost to 0dB effectively
de-assigns the filter, allows it to be assigned to another channel.
EQ Bandwidth
Width is only available for Bell type EQs 0.05 to 3.00 Octaves in 0.05 Octave steps.

REAR PANEL

1
+
+
+ +
+
(1) POWER SUPPLY JACK: 90~250VOLTS, 50/60HZ
(2) RS232 CONNECTOR
(3) MIDI OUT/MIDI IN/MIDI THRU
(4) OUTPUTS: OUTPUT 1~6
(5) INPUTS: INPUT 1~2
40
OUT 2
EQ1 FQ4
OUT 2
EQ1 + -
OUT 6
EQ1
3
2
+ +
Manual del usuario/ User´s manual
HIGH *
14KHZ
HIGH *
6.5DB
BAND 6 *
WD2.200 OCT
4
+
5
+
DSP-26