Care And Cleaning - Kohler K-394 Guía De Instalación Y Cuidado

Grifería de lavabo de orificios separados
Ocultar thumbs Ver también para K-394:
Tabla de contenido

Publicidad

Installation/Installation/Instalación
9
10
a
a
Remove aerator.
Retirer l'aérateur.
Quite el aireador.
b
Flush lines.
Vidangez les
conduites.
b
Haga circular agua
en las líneas.

Care and Cleaning

For best results, keep the following in mind when caring for your KOHLER product:
• Use a mild detergent such as liquid dishwashing soap and warm water for
cleaning. Do not use abrasive cleaners that may scratch or dull the surface.
• Carefully read the cleaner product label to ensure the cleaner is safe for use on the
material.
• Always test your cleaning solution on an inconspicuous area before applying to
the entire surface.
• Do not allow cleaners to sit or soak on the surface.
• Wipe surfaces clean and rinse completely with water immediately after cleaner
application. Rinse and dry any overspray that lands on nearby surfaces.
• Use a soft, dampened sponge or cloth. Never use an abrasive material such as a
brush or scouring pad to clean surfaces.
For detailed cleaning information and products to consider, visit www.kohler.com/clean.
To order Care & Cleaning information, call 1-800-456-4537 and press 1 for Kohler
Products and then 3 for Literature.
1012739-2-B
Connect and tighten the
supply hoses.
Connecter et serrer les
tuyaux d'alimentation.
Conecte y apriete las
mangueras de suministro.
Cold
Hot
Froid
Chaud
Caliente
Fría
Check for leaks.
Vérifier s'il y a des fuites.
Verifique que no haya fugas.
8
11
Reinstall aerator.
Réinstaller l'aérateur.
Vuelva a instalar el
aireador.
Kohler Co.

Publicidad

Tabla de contenido
loading

Tabla de contenido