ratiotec rs1000 Manual De Instrucciones página 7

Count coin rolls (only RS 1200)
The function to count coin rolls can be activated
or inactivated in the SETUP-menu. If this function
is activated, the coin roll symbol is shown on the
display after the last coin denomination. The mo-
ney scale identifies each coin roll automatically.
Please only place one coin roll per step. Wait until
the scale weighs the placed coin roll, before pla-
cing a new one. Coin rolls can be placed in any
desired sequence.
After the weighing procedure, remove all placed
coin rolls within one step.
Important Note:
The function to count coin rolls is only usable for
Euros. The coin roll paper has to be the standard
paper used by Banks. The money scale identifies
each roll automatically by comparing the placed
coin roll with a saved reference weight. If you
place a coin roll that does not match with one of
the reference weight, the message SUSPECT CHK
ROLL will appear on the display. To correct the er-
ror, remove only the last coin roll, not all! If you
remove more than one roll (not all of them) the
error message ERROR will appear on the display.
If this happens, remove all coin rolls and restart
the counting procedure.
The money scale cannot indicate if the coin rolls
are incomplete or if there are counterfeit coins in
the coin roll.
7