Peg-Perego DOUBLE ADAPTER YPSI/Z4 Instrucciones De Uso página 11

and the infant bassinet, seat
and car seat are properly
attached to the adapters
every time before using.
_ WARNING: Never leave
the child unattended.
_ WARNING: avoid serious
injury from falling or sliding
out. Always use a complete
5-point seat belt.
_ WARNING: when using the
infant car seat in the car,
check the adapters are not
attached onto the infant car
seat. Remove the adapters
from the infant car seat
before installing it in the
car.
_ WARNING: the adapters
must always be attached
onto the chassis. Never
use the bassinet, seat and
car seat with the adapters
attached unless it is being
used on the chassis.
_ This product is not a toy. Do
not let your child play with
this product.
_ The assembly and
preparation of the product
must be carried out by an
adult
_ Do not use this product if
there are parts missing or
signs of breakage.
_ Before fastening the various
components to the chassis:
Car seat or seat or bassinet,
fully extend the chassis'
handlebar.
_ WARNING: The
COMBINATIONS on pages 6
barred by thee prohibition
sign are not allowed.
_ Any weights hanging
on the handlebar or
handles could make the
item unstable; follow the
manufacturer's instructions
regarding the maximum
loads transportable.
_ Do not use the product
near to stairs or steps, heat
sources, naked flames or
dangerous objects within
reach of the child.
INSTRUCTIONS FOR USE
There are two types of adapters:
- those to be applied in the upper part of the
chassis (ADAPTERS A)
- those to be applied to the lower part of the
chassis (ADAPTERS B).
ADAPTERS A
Fastening the adapters to the upper part of
the chassis (ADAPTERS A)
1 First, close the chassis.
Then, lock the front wheels into the fixed
position (fig_a) and shorten the handlebar to
its shortest position (fig b). Rotate the safety
lever to the left (fig_c) and pull the frame's
internal handle towards you (fig_d).
Lift the handle until the frame is completely
folded (fig_e).
2 When folded, the stroller will stand upright.
Fasten the adapter as shown making sure it
clicks into place to ensure it is secure.
11