Operations; Timer Display - Haier HDP18PA Manual Del Usuario

HDP18PA-MANUAL 4/9/02
English

OPERATIONS

Understanding the Control Panel:
Power Button:
• Push this button to have power On/Off. Once the power is on,
the power indicator light will go "On".
Note: When you turn the power "On", the function indicator light will be displayed
at "Normal" wash cycle, "Full Load" and "Vented Dry" (off option).
Delay Start Button:
• Press this button to delay the starting time for a wash cycle. You can
delay the starting time for a wash cycle between 1 to 9 hours.

Timer Display:

• This display shows number of hours you set the timer to delay the
starting time for a wash cycle.
Door Latch:
• To lock the door, push the door with light force until
you hear the "Click". To unlock the door, squeeze
the door latch and pull towards you.
Warning: You must wait few seconds when opening dishwasher door during a
cycle to allow outside cold air to expand slowly inside the dishwasher
because of hot air/steam is still present inside the dishwasher. If you try
to remove items right a way after you open a door, the hot air/steam
may cause personal injur y.
Note: You must keep the door closed during the dishwasher operation in order to
avoid any water leak.
Wash Cycle Selector Button
• Press this button to select Heavy, Normal, Rinse & Hold and
Light wash cycle options. The function indicator light will
come on once you are in that option. (See page # 14 for
more detail under "Selecting Wash Cycle" section)
7
4:22 PM Page 9
1
:
ON
OFF
Heavy Rinse & Hold
Normal Light
1