Transmitting A Program Via La Radio - Rain Bird TBOS-II Manual De Instrucciones

ENG
- In the event of a radio communication problem, a reception
failure message will be displayed on the screen.
Repeat the operation.
Failure codes:
- Failure + : Radio communication problem Check the Radio
Adaptor battery.
- Failure IR: Infrared communication problem Clean the infrared part of
the apparatus or check the TBOS™ controller battery.
- Failure code 3: TBOS module type reading error. A radio adaptor
has been placed on a TBOS™ controller then moved onto a TBOS-II™
controller. This error will continue to appear until the radio interface
unit's battery is changed.
- Failure code 4: Authentication problem. Communication cannot be
established between the items of equipment. This authentication
phase between the TBOS-II™ field transmitter and the radio adaptor/
controller ensures that only RAIN BIRD products can communicate
with one another.

When the radio adaptor battery is changed, the program requires to be sent again by radio. This applies
where the radio adaptor is fitted on an old TBOS™ module.

6. Transmitting a program via la radio

This operation is performed in the same way as for a transmission via infrared. Once the irrigation program has been
changed, it can be transmitted by radio to the TBOS™ controller of your choice.
- Select "Transmit" from the Welcome menu and confirm by pressing OK.
- If the program is incomplete, a screen indicates the missing fields.
- Complete missing data until the transmission success.
28