ELICA ENS436BL Manual De Instrucciones página 7

Caution! Strictly observe the following
instructions:
- The device must be disconnected from
the electrical network before performing
any installation work.
- Installation or maintenance must be
performed by a qualified technician, in
compliance with the manufacturer's
instructions and with local safety
regulations. Do not repair or replace any
part of the device unless specifically
stated in the operating manual.
- Earthing the device is compulsory.
-Do not use multiple sockets or
extension cords.
- Once installation is complete, the
electrical components must no longer be
accessible by the user.
- The device and its accessible parts
heat up during use. Be careful not to
touch the heating elements.
- Ensure that children do not play with
the device; keep children away and
supervise them, as the accessible parts
may become very hot during use.
- For people with pacemakers and active
implants it is important to check, prior to
using the induction hob, that their
pacemaker is compatible with the
device.
- During and after use, do not touch the
heating elements of the device.
- Avoid contact with cloths or other
flammable materials until all the device
components have sufficiently cooled.
- Do not place flammable materials on or
near the device.
- Overheated fats and oils easily catch fire.
Supervise the cooking of foods rich in fat
and oil.
- If the surface is cracked, switch off the
device to avoid the possibility of an electric
shock.
- The device is not intended to be run with
an external timer or a separate remote
control system.
- Unattended cooking on a hob with oil or
fat may be dangerous and may cause a
fire.
- The cooking process must be supervised.
A short-term cooking process must be
constantly monitored.
- NEVER attempt to put fires out using
water. Instead, turn off the device and
smother the flames, for example with a lid
or a fire blanket. Fire hazard: do not rest
objects on the cooking surfaces.
- Do not use steam cleaners.
- Before connecting the device to the
electrical network: check the data plate (on
the bottom of the device) to ensure that the
voltage and power correspond to the
network values and that the connection
socket is suitable. If in doubt, consult a
qualified electrician.
Important:
- After use, switch off the hob from its
control device and do not rely on the pot
detector.
-Avoid spills; when boiling or heating
liquids, lower the heat supply.
7