Functional Description; Intended Use; Product Features; Declaration Of Conformity - Bosch PSR 12-2 Manual Original

Ocultar thumbs Ver también para PSR 12-2:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 31
16 | English
Switch off the power tool immediately
when the tool insert jams. Be prepared for
high reaction torque that can cause kick-
back. The tool insert jams when:
— the power tool is subject to overload or
— it becomes wedged in the workpiece.
Hold the machine with a firm grip. High re-
action torque can briefly occur while driving
in and loosening screws.
Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held
more secure than by hand.
Keep your workplace clean. Blends of mate-
rials are particularly dangerous. Dust from
light alloys can burn or explode.
Always wait until the machine has come to
a complete stop before placing it down. The
tool insert can jam and lead to loss of control
over the power tool.
Do not open the battery. Danger of short-
circuiting.
Protect the battery against heat, e. g.,
against continuous intense sunlight,
fire, water, and moisture. Danger of
explosion.
Use only original Bosch batteries with the
voltage listed on the nameplate of your
power tool. When using other batteries, e. g.
imitations, reconditioned batteries or other
brands, there is danger of injury as well as
property damage through exploding batter-
ies.

Functional Description

Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may
result in electric shock, fire and/or
serious injury.

Intended Use

The machine is intended for driving in and loos-
ening screws as well as for drilling in wood, met-
al, ceramic and plastic.
1 609 929 T04 | (17.11.09)

Product Features

The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Keyless chuck
2 Torque preselection ring
3 Gear selector
4 Indicator for right rotation
5 Indicator for left rotation
6 Screwdriver bit*
7 Battery unlocking button
8 Battery*
9 "Power Light"
10 Rotational direction switch
11 On/Off switch
12 Handle (insulated gripping surface)
13 Universal bit holder*
14 Securing screw for keyless chuck
15 Allen Key**
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
**Commercially available (not included in the deliv-
ery scope)

Declaration of Conformity

We declare under our sole responsibility that
the product described under "Technical Data" is
in conformity with the following standards or
standardization documents: EN 60745 accord-
ing to the provisions of the directives
2004/108/EC, 98/37/EC (until 28 Dec 2009),
2006/42/EC (from 29 Dec 2009).
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider
Senior Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
26.10.2009
Dr. Eckerhard Strötgen
Head of Product
Certification
Bosch Power Tools

Hide quick links:

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Psr 14,4-2Psr 18-2

Tabla de contenido