Radio Functions - Clatronic AR 815 USB/CR Manual De Instrucciones

NOTE
►
If no information is available NO CLOCK or NO PTY is
displayed.
Setting the time manually
If the time should not be set automatically, proceed as follows:
‹
DSP (10) for a short while until the time ap-
Press the button
pears on the display.
‹
Now keep the button DSP pressed until the minutes flash.
‹
Turn the multi-controller (3) to make the setting.
‹
DSP for a short while. The hours start
Press the button
flashing.
‹
Turn the multi-controller (3) to make the setting.
Reset Radio
To reset the unit to default settings press RESET (4) with a pointed
object, i.e. pen.
Reset the unit when:
■
using it the first time after all cabling is done,
■
malfunctions of buttons occur,
■
error messages are displayed.

Radio Functions

Set RADIO Mode
‹
MODE (21) until frequency and band are
Repeatedly press
displayed.
Select Frequency Band
‹
Press BND/LOU/ENT (7) to toggle between FM1, FM2, FM3
and AM. The selected frequency band is displayed.
All manuals and user guides at all-guides.com
Auto Search
‹
Manual Search
‹
‹
After two seconds idling the unit returns to auto search. The display
shows AUTO.
Save Station
For each frequency band 6 station presets are available.
‹
Access Saved Station
‹
‹
Auto Save
‹
‹
‹
Cycle Through Saved Stations
‹
‹
(27) to start auto search, SEARCH
Press (26) or
is displayed. Search stops if a station is found.
Press and hold (26) or
displayed.
Press (26) or (27) to step through the FM
frequency band in steps of 0.05 MHz and 9 kHz for AM until
the desired frequency is displayed.
Press and hold the desired numeric button (17) approx. 2
seconds to save the current station. A beep can be heard after
successful storage (except setting to BEEP OFF).
BND/LOU/ENT (7) to select the desired frequency
Press
band.
Press one of the numeric buttons (17) to access the respective
station.
BND/LOU/ENT (7) to select the desired frequency
Press
band.
Press and hold AS/PS/D-AUD (22). SEARCH is displayed.
The unit starts automatic search. With search, the first 18 sta-
tions are checked. The respective preset flashes.
Press one of the numeric buttons (17) to access the respective
station.
Press AS/PS/D-AUD (22). All stations are briefly played in
sequence.
Press AS/PS/D-AUD (22) when the desired station comes
up. This station stays tuned into.
(27) until MANUAL is
73