Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
UNIVERSAL MASTERPIECE BORN IN JAPAN
INSTRUCTION MANUAL FOR MIYOTA WATCH MOVEMENT
CALIBER NO. 0S10/0S1A
CHRONOGRAPH FUNCTION: CENTER SECOND HAND CHRONOGRAPH 1/1 sec. Timing
up to 11 hours 59 minutes 59 seconds
BATTERY: SR927W
A) DISPLAYS AND BUTTONS
B) SETTING THE TIME
C) SETTING THE DATE
D) USING THE CHRONOGRAPH
E) CHRONOGRAPH RESET (INCL. AFTER REPLACING BATTERY)
Chronograph
minute hand
Hour hand
Chronograph
hour hand
B) SETTING THE TIME
1. Pull the crown out to the 2nd position.
2. Turn the crown to set hour and minute hands.
3. When the crown is pushed back to the normal position, small second hand begins to run.
C) SETTING THE DATE
1. Pull the crown out to the 1st position.
2. Turn the crown counter-clockwise to set the date.
*If the date is set between the hours of around 9:00 PM and 1:00 AM, the date may not change on the
following day.
3. After the date has been set, push the crown back to the normal position.
D) USING THE CHRONOGRAPH
This chronograph is able to measure and display time in 1/1 second united up to maxinum of 11 hours 59
minutes 59 seconds.
The chronograph second hand keeps continuously for 11 hours 59 minutes 59 seconds after starting.
Measuring time with the chronograph
1. The chronograph can be started and stopped each time button "A" is pressed.
2. Pressing button "B" resets the chronograph and the chronograph second hand, chronograph minute
hand, and chronograph hour hand return to zero position.
RESET
E) CHRONOGRAPH RESET (INCL. AFTER REPLACING BATTERY)
This procedure shoud be performed when the chronograph second hand does not return to zero position
after the chronograph has been reset, and including after the battery has been replaced.
1. Pull the crown out to the 2nd position.
2. Press button "A" to set the chronograph second hand to the zero position. The chronograph hand can
be advanced rapidly by continuously pressing button "A".
3. Once the hand have been zeroed, return the crown to the normal position.
* Do not push crown to normal position while the chronograph second hand returns to zero position.It
stops on the way when crown are returned to normal position and its position is recognized as zero
position.
MIYOTA
MADE IN JAPAN
METAL MOVEMENT
Chronograph
second hand
Button A
Button B
Small Second hand
" A "
TIME MEASUREMENT
Minute hand
1st position
2nd position
Normal crown position
Calendar
" A "
STOP
" A "
" B"
" B "
Publicidad
Manuales relacionados para MIYOTA 0S10 Serie
Resumen de contenidos para MIYOTA 0S10 Serie
- Página 1 MIYOTA UNIVERSAL MASTERPIECE BORN IN JAPAN MADE IN JAPAN METAL MOVEMENT INSTRUCTION MANUAL FOR MIYOTA WATCH MOVEMENT CALIBER NO. 0S10/0S1A CHRONOGRAPH FUNCTION: CENTER SECOND HAND CHRONOGRAPH 1/1 sec. Timing up to 11 hours 59 minutes 59 seconds BATTERY: SR927W A) DISPLAYS AND BUTTONS...
- Página 2 MIYOTA UNIVERSAL MASTERPIECE BORN IN JAPAN MADE IN JAPAN METAL MOVEMENT ミヨタウォッチムーブメント取扱説明書 キャリバー番号： 0S10/0S1A クロノグラフ機能：センタークロノ秒針1/1秒単位で最大11時間59分59秒まで計測 電池 : SR927W A) 表示部とボタン B) 時刻の合わせ方 C) 日付の合わせ方 D) クロノグラフの使い方 E) クロノグラフリセット（電池交換の後など）...
- Página 3 MIYOTA UNIVERSAL MASTERPIECE BORN IN JAPAN MADE IN JAPAN METAL MOVEMENT BEDIENUNGSANLEITUNG FÜR MIYOTA UHRWERK KALIBER NR. 0S10/0S1A Messfunktion des Chronographen: Chronograph mit mittlerem Sekundenzeiger 1/1 (1-Sekunden-Einheiten)/Zeitnehmung bis zu 11 Stunden, 59 Minuten und 59 Sekunden. Batterie: SR927W A) DISPLAY UND KNÖPFE...
- Página 4 MIYOTA UNIVERSAL MASTERPIECE BORN IN JAPAN MADE IN JAPAN METAL MOVEMENT MODE D'EMPLOI DU MOUVEMENT DE MONTRE MIYOTA CALIBRE : NO. 0S10/0S1A Fonction de chronographe : Chronomètre avec trotteuse au centre 1/1(seconde comme unité)/Chronométrage jusqu'à 11 heures 59 minutes 59 secondes.
-
Página 5: Usando El Cronógrafo
UNIVERSAL MASTERPIECE BORN IN JAPAN MADE IN JAPAN METAL MOVEMENT MANUAL DE INSTRUCCIONES DEL RELOJ MIYOTA N˚ DE CALIBRE 0S10/0S1A Fonction de chronographe : Cronógrafo con manecilla central de segundos 1/1(unidades de 1 segundo)/Cronometraje hasta 11 horas 59 minutos 59 segundos. -
Página 6: Impostazione Dell'ORario
UNIVERSAL MASTERPIECE BORN IN JAPAN MADE IN JAPAN METAL MOVEMENT MANUALE DI ISTRUZIONI PER IL MOVIMENTO DELL’OROLOGIO MIYOTA CALIBRO NO. 0S10/0S1A FUNZIONE DI CRONOGRAFO: Cronografo con lancetta centrale dei secondi 1/1(unità di 1 secondo)/Cronometraggio fino a 11 ore 59 minuti e 59 secondi. - Página 7 UNIVERSAL MASTERPIECE BORN IN JAPAN MADE IN JAPAN METAL MOVEMENT MANUAL DE INSTRUÇÕES PARA MOVIMENTO DO RELÓGIO MIYOTA CALIBRE Nº 0S10/0S1A FUNÇÃO DE CRONÓGRAFO: Cronógrafo com ponteiro dos segundos central 1/1 (unidades de 1 segundo)/Medição até 11 horas, 59 minutos e 59 segundos PILHA: SR927W A) MOSTRADOR E BOTÕES...
- Página 8 MIYOTA 0S10/0S1A...
- Página 9 MIYOTA UNIVERSAL MASTERPIECE BORN IN JAPAN MADE IN JAPAN METAL MOVEMENT « » 0S10/0S1A — — 11 SR927W 21.00 1.00 " A " " A " " A " "B " " B " —...