Ordering Replacement Parts - EMAK STARJET AJ102 Manual De Usuario

Problem
The driving belt is
sliding.
The drive belt squeaks.
The drive belt jumps
out during operation
The machine does
not move when the
accelerator is pressed
There is a lot of
vibration while driving
The steering slips or is
loose.
The engine doesn't run
Engine turns but won't
fire
The machine can't be
pushed, or only with
difficulty
There is a whistling
sound while driving

7.1 ORDERING REPLACEMENT PARTS

We recommend using original replacement parts, which guarantee safety and interchangeability. Always
order replacement parts through an authorized dealer or service organization that is informed about the
current technical changes to the products during production.
For fast, precise identification of the replacement part you need, always include the serial number on
the order form. You will find this number on inside cover of this publication. Also include the production
year, which is on the manufacturer's label below the driver seat.
7.2 WARRANTY
The warranty requirements are described on the warranty card, which is supplied with your machine at
the dealer.
 Check the drive belt tension (
 Check to see if the belt is damaged or worn.
 Check to see if the drive coupling mechanism is blocked by a foreign object. If it is, remove
the object.
 Check to see if the engine or transmission pulley is damaged. If necessary, replace it.
 Check the drive belt tension (
belt tension. If the brake operation is not in order, have an authorized service centre adjust it.
 Check the drive belt tension (
 Check the belt guide. If necessary, adjust it.
 Check for damaged pulleys. Replace them, if necessary.
 Check the space between the drive coupling mechanism. If there are deviations, the coupling
pulley support may be bent. Replace it if necessary.
 Check the drive belt tension (
 Check the engine and transmission pulleys for sheared or cut grooves. Replace if necessary.
 Check for damaged or deformed pulleys. Replace them, if necessary.
 Check to see if the drive belt has burnt areas or other irregularities. Replace it, if necessary.
 Check the drive belt tension (
 Check the balance of the mowing blades. Replace or rebalance them, if necessary.
 Check to see if there is too much play between the segment and the pinion. If there is, adjust
the toothed segment. Check for wear to the ball joints. If necessary, replace the joints.
 Check to see if there is fuel in the tank.
 Check to see if the designated engine start-up procedure has been followed (
 Check the fuse. If necessary, replace it.
 Check to see that the battery's pole voltage is 12 V. On a new machine, make sure the battery
has been activated and charged. On new machines, remove the spark plugs and make sure
that the oil hasn't accumulated in the cylinder due to improper handling.
 Check to see that all wire connectors are in order and that the electrical system's switches are
operational.
 Test the engine exactly according to its manufacturer's user manual. Have the machine's
electrical system tested at a professional workshop.
 Check to see if the designated engine start-up procedure has been followed (
to see if the fuel in the tank is clean.
 Check to see if the fuel filter is clogged.
 Check to see if the fuel cap is open (only on BS15.5 engines).
 Make sure that the fuel lever is in the "STARTER" position.
 Test the engine exactly according to its manufacturer's user manual. Have the machine's
wiring and switches tested at a professional workshop.
 Check to make sure the bypass lever is in the "0" position.
 Check the belts, and the guide and tensioning pulleys. If the problems persist, seek out an
authorized service centre.
Solution
6.3.12). If necessary, adjust the tension.
6.3.12) and the brake operation. If necessary, adjust the
6.3.12). If necessary, adjust the tension.
6.3.12). If necessary, adjust the tension.
6.3.12). If necessary, adjust the tension.
59
5.2)
5.2). Check