ENGLISH
Important:
The top of the chimney does not necessarily have to have the same dimensions as
the base of the product.
But if the smoke stack cross-section measures less and 15 x 15, or on equivalent
diameter (17 cm) , the smoke stack will not function properly, and the chimney draft
may also be insufficient. In this case, contact the Vortice office for instruction.
The electrical system must meet the existing norms.
The unit should be adjusted to function according to the fire situation in the fire-
place.
When starting up = Adjust to the maximum setting so as to push out all the cold
that is blocking the chimney;
When the fire is going normally = Adjust to the minimum setting, just enough to eli-
minate the smoke.