WEG EtherNet/IP Fieldbus Guia De Instalacion página 5

Sizes 3 and 4 (models above 30A):
Install the metal "L" that comes with the kit
Install the RJ45 Ethernet connector on the metal "L"
Interconnect the Fieldbus connector (on the communication board) and the RJ45
connector by using the 150mm Ethernet cable
Firmly secure the assembly to the metal plate that supports the control board.
Ethernet Cable
RJ45 Connector
Step 9 Connect the other Ethernet cable end to the communication board.
;
;
Figure 3: Mounting on sizes 3 to 10
;
3