Infrared Remote Control; Operation - Chauvet DJ HELICOPTER Q6 Guía De Referencia Rápida

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Operation

IRC-6 Infrared Remote Control
The Helicopter Q6 is compatible with the IRC-6 infrared remote control from Chauvet. To activate IR mode,
follow the instructions below:
1.
Press <MENU> repeatedly until SEt shows on the display.
2.
Press <ENTER> to accept.
3.
Press <UP> or <DOWN> to select on or oFF.
4.
Press <ENTER>.
IRC-6 Operation
Automatic Mode
Automatic mode will enable you to run the automatic programs on the product.
To turn on Automatic mode:
To adjust the speed of the automatic program:
Sound-Active Mode
Sound-Active mode will enable the product to respond to the music.
To turn on Sound-Active mode:
Manual Mode
To set the Helicopter Q6 in manual mode and choose a static color with the IRC-6:
To control the rotation direction with the IRC-6 in manual mode:
To control the rotation speed with the IRC-6 in manual mode:
To adjust the strobe rate of the static color:
Black Out
To black out the lights:
This will turn off all the lights until the button is pressed again.
NOTE: The IRC-6 will not respond to any inputs when Black Out is activated. If the
remote does not respond when a button is pressed, try pressing <BLACK OUT>.
You may have inadvertently activated Black Out.
Helicopter Q6 User Manual Rev. 2
1.
Press <AUTO> on the IRC-6.
2.
Press <AUTO> repeatedly to cycle through auto programs, or
Press <0>–<9> to choose an auto program.
1.
Press <SPEED> on the IRC-6.
2.
Press <+> or <–> to increase or decrease the speed of the program.
1.
Press <SOUND> on the IRC-6.
2.
Press <SOUND> repeatedly to cycle through programs, or
Press <0>–<9> to choose a sound-active program.
1.
Press <R> (red), <G> (green), <B> (blue), or <W> (white) on the IRC-6.
1.
Press <A> to toggle clockwise or counter-clockwise rotation.
1.
Press <SPEED> on the IRC-6.
2.
Press <+> or <–> to increase or decrease the rotation speed.
1.
Press <STROBE> on the IRC-6.
2.
Press <+> or <–> to increase or decrease the strobe rate.
1.
Press <BLACK OUT> on the IRC-6.
Page 15 of 94

Publicidad

Tabla de contenido
loading

Tabla de contenido