Fuse Replacement; Infrared Remote Control - Chauvet DJ Intimidator Wash zoom 450 IRC V2 Guía De Referencia Rápida

Intimidator Wash Zoom 450 IRC V2 QRG
AC Power
Fuse
Replacement
Infrared Remote
Control 6
(IRC-6)
This product has an auto-ranging power supply that can work with an input
voltage range of 100 to 240 VAC, 50/60 Hz.
To eliminate unnecessary wear and improve its lifespan, during periods
of non-use completely disconnect the product via breaker or by
unplugging it.
1. Disconnect the product from power.
2. Using a flat-head screwdriver, loosen the fuse holder and pull straight out.
3. Remove the blown fuse from the holder and replace with a fuse of the
exact same type and rating.
4. Re-insert the fuse holder and reconnect power.
The Intimidator Wash Zoom 450 IRC V2 is compatible with the Infrared
Remote Control 6 (IRC-6) from Chauvet.
The following IRC-6 buttons are used with the Intimidator Wash 450 IRC:
• <BLACKOUT> - turns LED on/off
• <AUTO> - selects auto program mode (scrolling)
• <SOUND> - selects Sound-Active mode
• <STROBE> - strobing (0–20 Hz)
• <SPEED> - Pan/Tilt Auto program speed
• <SENSITIVITY> - selects sound sensitivity
• <%> - LED dimmer
• <MANUAL> - white (RGB) LED manual control
• <FADE/SNAP> - Press once for Fade color change/Press twice for Snap
• <R> - red LED manual control
• <G> - green LED manual control
• <B> - blue LED manual control
• <W> - white LED manual control
• <UV> - Zoom manual adjustment
• <+> - Increase
• <-> - Decrease
• <0> to <9> - Select Auto Program by Number
5
EN