Glacier bay 65710N-B8401 Guía De Instalación Y Cuidado página 21

Installation (continued)
5
Securing the faucet assembly
□
Install the rubber washer (B), and metal washer
(C) onto the threaded mounting shank.
□
Thread the nut (D) onto the mounting shank
using the wrench. Do not overtighten.
7
Attaching the quick connector
to the receiving block
□
Push the quick connector (H) rmly upward and
attach it to the receiving block (1). Pull down
moderately to ensure the connection has been
made.
□
Install the weight clip (N) at the point of the
hose marking "weight here".
□
Insert the weight (I) onto the clip (N) by sliding
it down onto the clip (N).
B
C
D
6
Attaching the quick connector
to the hose
□
After inserting the hose through the hole in the
sink surface, reattach the quick connector (H)
by screwing it onto the threaded end of the
hose (1) in a clockwise motion. Hand tighten
only.
H
1
I
N
N
21
I
1
H