Glacier bay 65710N-B8401 Guía De Instalación Y Cuidado página 22

Installation (continued)
8
Installing the soap dispenser
□
Insert the soap assembly (K) through the
selected hole in the sink. Secure the soap
assembly to the sink with the soap dispenser
mounting nut (L) provided.
□
From under the sink, screw the soap bottle (M)
onto the soap assembly (K) shank. Insert the
soap pump (J) down into the soap assembly (K).
J
K
L
M
22
9
Making the water supply
connections
NOTE: The hot side inlet tube is indicated by a label. Avoid
twisting wires together or placing the wires close to each
other and damaging.
□
Thread the connector (O) onto the hose (1).
□
Thread the connector (O) on the supply line onto
the outlet of the water supply valve (2) and tighten
with a wrench. Do not overtighten.
1
O
2
Please contact 01-800-00-4663-3 for further assistance.
HOMEDEPOT.COM.MX