Descargar Imprimir esta página

Helvex E-308 Guia De Instalacion página 3

Publicidad

La salida es
giratoria./ The foucet can rotate
11
Mantenimiento del Cuello / Neck Maintenance
Desenrosque el aireador con la llave (incluida) y límpielo a
13
chorro de agua con un cepillo suave. Para purgar deje correr el
agua caliente y fría durante al menos 15 segundos cada una y
proceda a armar nuevamente. /
wrench (included) and clean water jet with a soft brush. To
purge run hot and cold water for at least 15 seconds each and
proceed to arming.
llave para
aireador (incluida)
aireator wrench
(included)
Mantenimiento de las Válvulas Check / Maintenance Check Valves
Válvula Check del Cabezal
15
Header Check Valve
Desenrosque el cabezal, retire la válvula check, limpie a chorro
de agua y arme nuevamente.
check valve, clean water jet and assemble again.
check valve
Remove the aerator with
aerator
/ Unscrew the head, remove the
head
Gire el soporte en la dirección deseada y desmonte el cabezal.
12
/ Turn the stand in the desired direction and remove the head.
Mantenimiento del Cabezal
/ Maintenance of the Head
Pase el dedo por encima de los anticalcáreos del cabezal para
14
eliminar el sarro. Para purgar deje correr el agua caliente y fría
durante al menos 15 segundos cada una y proceda a armar
nuevamente.
/
Swipe your finger over the anti-limescale to
remove the
limescale.To purge run hot and cold water for at
least 15 seconds each and proceed to arming.
head
anti-limescale
limescale
Válvula Check del Cuerpo Monomando
16
Single-body Check Valve
Desenrosque y retire el tapón check con la llave allen 1/4" (no
incluida), retire la válvula check, limpie a chorro de agua y arme
nuevamente.
/ Unscrew and remove the check cap with the allen
key 1/4 "(not included), remove the check valve, clean it with a
water jet and assemble again.
stopper check
head
check valve
1/4 "allen key (not included)
3

Publicidad

loading