Operation - Ducasa TBP DRY Serie Manual De Instalación Y Funcionamiento

COTROL PANEL
Symbol
OK-boost
M
+ / -

5. OPERATION

1. Mode selection (OK-boost button)
1. After you connect to the power supply and after that the clock is set, the device will be in
standby mode, and you can press the standby button to go to comfort mode.
Notes: In case of power failure, the unit keep in memory only the parameters,
temperature and operating mode. When power is restored, the clock should be adjusted
again to operate the program modes properly.
Press OK-boost to toggle among the modes: comfort
24
Function
Standby
Confirm button or hold 3 seconds to select bSt1/bSt2 mode or
short press to select from below modes:
Mode comfort
Mode eco
PRG mode/ pilot mode
Mode anti-freeze
Press M to enter setting menu: time setting / program modes
setting / window detection function / Keyboard lock
Set the time, day of the week, the temperature; or under
weekly personalized programs, to choose between comfort
mode, eco mode or standby mode.
or Fil Pilote / Anti-freeze
/ Eco / Program mode
.