Ducasa TBP DRY Serie Manual De Instalación Y Funcionamiento página 25

2. Program modes
appliance is working on Program mode, press and hold OK-boost button for 3 seconds,
the appliance will shift from Program mode to Fil pilote mode.
When the appliance is working on Fil pilote mode, press and hold OK-boost button for 3
seconds, the appliance will shift from Fil pilote mode to Program mode.
The interface of program mode and Fil pilote mode are as below:
Program mode
Note: For the program mode, mode setting and mode selection is separated. If you want
to set the program mode, press + & - together to enter setting menu to choose program mode
setting and press OK-boost button to enter setting interface. For details, please refer to part
2 "Program mode setting" under section III "Setting menu".
2. Fil-pilote mode
External Mode Setting
Comfort mode
Comfort mode
Comfort mode
If
Economic mode
Antifreeze mode
Standby mode
When the external controller is programmed, the display shows:
3. Boost mode bSt1/bSt2
Under all other working modes except program mode or Fil pilot mode, press and hold OK-
and Fil pilote
Icon Displayed
-1
-2
are mutually exclusive. When the
Fil pilote
Press OK-boost button to choose
mode Program modes or Fil pilote
mode. Under Fil-pilote mode, select
the mode via the external control (for
France only). For other countries
except France, if you choose mode
Fil pilote P, the appliance will work at
comfort mode as default.
the working interface is at Program
mode, press and hold OK-boost
button for 3 seconds, the appliance
will shift from Program mode to Fil
pilote.
25