Urmet 1083 Manual Del Usuario página 10

ENGLISH
The special decoder Ref. 1083/80 is dedicated to 2Voice system and allows to activate electric loads by
means of a 230Vac 5A contact relay with commands (events) sent by users with apartment stations, call
stations or switchboard.
The main uses are:
• Driveway passages opening.
• Stairs lights lighting.
• Electric loads activation/deactivation.
Device main features are:
• Monostable operating mode with activation time adjustable from 1 second to 16 minutes, or toggle
mode.
• Activation with system events (4 maximum, with competence areas jumper to C or Q) programmable
by the installer.
• Possibility of activation with user events (32 max. with competence areas jumper to S), programmable
by the installer.
• A remote button can be connected for activation.
A - User code dip-switch used to identify the decoder in the system
B - Competence area jumpers:
S = only the device used to acquire the event
C = all devices of the riser column used to acquire the event
Q = any system device
C - Switch mode jumper
M = monostable
T = toggle
D - Programming button and led
E - Trimmer used to adjust the activation timer in monostable mode (M)
F - Remote button connection terminal pins (PC)
G - Line connection terminal pins (LINE)
H - Terminal pins of relay contact used to activate electric loads (C-NC-NA)
INSTALLATION
The special decoder can be installed in a service panel on DIN rail (6 18mm DIN modules) or wall mounted
with screws and screw anchors (not provided).
For installation, follow general installation instructions of 2Voice system in the system booklet provided with
the power supply ref. 1083/20.
Please observe also the following rules:
• The special decoder can be installed only using the 4-user distributor 2Voice ref. 1083/55; connect it to
one of the 4 distributor outputs.
10
C
B
A
ON
CODE
Sch.1083/80
NA NC C
H
S C Q M T PROG
LINE
D
E
TIMER
PC
F
G
DS1083-019D