Federal Signal Global G-SND Manual De Instalación Y Mantenimiento página 18

Installation and Maintenance Instructions
120 Vac operation (no remote switching of tones)
a. Set the voltage selector switch to
b. Turn the tone selector switch to the desired tone.
c. Connect the line (hot) power source wire to the terminal
d. Connect the neutral (common) power source wire to the
e. Connect ground wire to the terminal block position
24 Vdc operation (no remote switching of tones)
a. Turn the tone selector switch to the desired tone.
b. Connect the positive (+) power source wire to the
c. Connect the negative (
d. Connect ground wire to the terminal block position
220-240 Vac operation (remote switching of tones)
a. Set the voltage selector switch to
b. Set the tone selector switch to
c. Connect the line (hot) power source wire to the terminal
d. Connect the neutral (common) power source wire to the
e. Connect ground wire to the terminal block position
18
block position marked
terminal block position marked
marked
EARTH
terminal block position marked
terminal block position marked
marked
EARTH
block position marked
terminal block position marked
marked
EARTH
Model G-SND Global Series Sounder
on the PCB.
L1
.
) power source wire to the
–
.
on the PCB.
L1
.
.
120
on the PCB.
L2
on the PCB.
+
on the PCB.
–
.
240
.
0
on the PCB.
L2