Mounting The G-Snd Sounder - Federal Signal Global G-SND Manual De Instalación Y Mantenimiento

Installation and Maintenance Instructions
The proprietary coupling system allows for simple and cost effective,
wiring from product to product often eliminating the need for
expensive Ex wiring practices and Ex rated glands. The E-box is
available only when factory installed on an Ex d unit or when used
as a E-box spacer adjoining an existing E-box. Please refer to the
accessories listed on page 29 for available options. When creating
certain fixture combinations, it is necessary to replace E-box end caps
before mounting the product. If you are creating combination fixtures,
refer to instruction manual 25500259 for specific instructions and
details.
A note about combination fixtures: If the product is Ex db marked
only, it is for use in gas atmospheres. If the product is Ex db e marked,
it uses the increased-safety terminal enclosures and is only for gas
atmospheres. If the product is Ex tb marked, it is for installation in
dust atmospheres.

Mounting the G-SND Sounder

ATTACH THE SOUNDER SECURELY: To prevent injury, this
apparatus must be securely attached to the mounting surface
in accordance with the installation instructions. Use installer-
supplied fasteners suitable for the mounting surface.
The mounting method and the installer-supplied mounting hardware
depend on which of the three G-SND models you are installing:
Model G-SND Global Series Sounder
8