Product Familiarisation - GMS GMHS30 Manual De Instrucciones

Brush Cutter & Line Trimmer Safety
WARNING: Petrol fumes are combustible, DO NOT SMOKE when handling/using this tool
• Always check the work area for hidden objects, fencing, cables etc. Ensure that material to be cut does not
contain any objects. Be sure that it is safe to cut before starting the job
• Always wear appropriate safety equipment. Use of this tool requires gloves, eye or face protection, dust
mask, ear defenders, hard hat, and sturdy clothing
• Assess your own physical condition. Using a brush cutter, even a smaller model, is physically demanding.
Do not start a job unless you are confident that you are fit and strong enough to complete it. Never use a
brush cutter when tired, unwell, or under the influence of any kind of drugs or alcohol
• Check that other people are a safe distance away from the work area before starting to cut. Never allow
children or pets near to the work area
• Do not use this product in wet conditions. Ensure that material to be cut is dry before starting work
GB
• Do not use this tool if any guards are missing or damaged
• This tool should only be used in an upright position, with the spool or blade close to the ground
• Walk slowly when carrying this tool. Freshly cut grass or brush is slippery, and may conceal trip hazards
• Only use correct nylon trimmer line or specialist blades. Attempting to use any other kind of cutting
accessory is highly dangerous
• Never pass arms or legs near to the blade when cutting. Always stand in a stable position, well back from
the cutting area
• If the brush cutter jams, switch off immediately. Allow the engine to completely stop before attempting to
clear jammed material
• Be prepared for the possibility of kickback. In some circumstances, if used incorrectly, the brush cutter may
be thrown back towards the user. Correct use and regular maintenance will significantly reduce the chance
of kickback occurring
• *Do not work alone. Ensure that there is someone nearby to help in an emergency
• Always stop the tool before crossing gravel paths or roads

Product Familiarisation

1. Guide Bar Securing Nut
2. Sprocket Cover
3. Cutting Head Assembly
4. Guard Bracket
5. Shaft Locking Knob
6. Shaft Connector
7. Shaft Locating Lever
8. Upper Shaft
9. Rubber Grip
10. Shoulder Strap Mounting Hole
11. Ignition Switch
12. Trigger Lock
13. Rear Handle
14. Throttle Trigger
15. Recoil Starter
16. Brush Trimmer Shaft
17. Chainsaw Shaft
18. Angle Position Lever
19. Adjustment Handle
20. Hedge Trimmer Blade
21. Hedge Trimmer Shaft
22. (Image 2) Fuel Mixing Bottle
23. Safety Cover
24. Guide Bar
25. Saw Chain
26. Brush Trimmer Guard
27. Brush Cutter Blade
28. Bump Feed Spool Head
29. Shoulder Strap
30. Front Handle
31. Small Hex Key
32. Spanner
33. Large Hex Key
34. Multi Screwdriver
35. Spark Plug Combi Tool
36. Fuel Tank
37. Fuel Cap
38. Primer Bulb
39. Choke Lever
40. Air Filter Cover
41. Air Box
42. Idle Adjustment Screw
43. Ignition Lead
44. Exhaust Muffler
45. Tensioning Lug
46. Tensioning Screw
47. Guide Bar Securing Stud
48. Locating Extrusion
49. Oiling Port
50. Chain Oil Reservoir Cap
51. Sprocket
52. Chain Oil Reservoir
12