Output Power - Kostal PIKO 1.5 MP Manual De Instrucciones

Short Manual
3.7. Structure
3.8. Display

Output power

24
1 Hood
2 Display (monochrome, 128 x 64 pixels)
3 Type plate, serial number, warning notices
4 Operating buttons: ESC, , , SET
(from left to right)
5 RJ10-socket (Modbus RTU)
6 RJ45 socket (LAN)
7 RJ45 sockets (2 x RS485 bus)
8 DC circuit breaker (interrupts the plus and minus
inputs simultaneously)
9 DC connection, Minus (−) for solar module
10 DC connection, Plus (+) for solar module
11 AC connection
Example status display of the output power:
1 Display label
2 Measurement with units
3 Date
4 Symbol Non-confirmed event messages
5 Animated symbol Connect
(indicates data traffic on the RS485 bus)
6 Symbol Derating
7 Symbol Fixed voltage mode activated
8 Time
has been established, display alternates with ③ – ⑦
9 IP address of the device when a network connection
06/2016 | DOC01666746 | KOSTAL Short Manual PIKO 1.5 - 4.2 MP