Iii.- Electric Specifications; Iv.- How To Change The Pleated Filter (Wd-6K2, Wd-9K2) - Koblenz WD-6K2 Manual De Servicio

MODEL
WD-6K2
WD-9K2
The vacuum cleaner has a polarized plug as shown in the figure.
An adapter can be used to connect to a
contact pin unpolarized.
The temporary adapter may be used only as a
qualified electrician install a polarized outlet
like the one shown in the figure.
1. Place the pleated filter into the cage, push
the filter in until it stops against the bottom
wall of the vacuum head.
3. Place the nut and tighten again.

III.- Electric Specifications

VOLT
120V
120 V
IV.- How to change the pleated filter
2. Place the retainer over the filter.
4. Place the head in place and the vacuum
cleaner is ready for use.
8/10
AMP
7
9
MODIFICADO MAYO 2015.
Hz.
60
60