Publicidad
Idiomas disponibles
Idiomas disponibles
Failure
DON'T TURN ON
LOW SUCTION
WARMING TO OPERATE
V.-FAILS AND CORRECTIONS
Causes
BAD CONNECTION OR
DAMAGE IN THE PLUG
CONTACT ELECTRICITY NOT
WORK
SWITCH CONTACT LINE WITH
FALSE OR DAMAGED
CORD LINE DAMAGE
MOTOR DAMAGE
FULL TANK
FILTER DIRTY
FILTER DAMAGE
BAG DISPOSABLE FULL
LOW REVOLUTIONS MOTOR
HEAD VACUUM CLEANER IN
TANK MISPLACED
HOSE BLOCKED
TURBINE LOOSE OR WITH
TRASH.
THE MOTOR IS SPARKING A
LOT
COOLING BAFLE DAMAGE
BEARING OF MOTOR
DAMAGE
9/10
Correction
IF THERE IS FALSE, IT SHOULD
BE REPAIRED, IF THERE IS
DAMAGE, IT SHOULD BE
CHANGED
CHECK THAT THERE IS
VOLTAGE IN LINE CONTACT.
IF THERE IS FALSE, IT SHOULD
BE REPAIRED, IF THERE IS
DAMAGE, IT SHOULD BE
CHANGED
CHANGE DE CORD LINE
CHANGE THE MOTOR
EMPTY THE TANK
SHAKE THE FILTER
CHANGE THE FILTER
CHANGE THE BAG
CHANGE THE MOTOR
PUT PROPERLY AND CHECK
THAT THE LOCKS ARE IN THE
CLOSED POSITION
CHECK IF THE HOSE HAVE
SOME OBSTRUCTION, IF
THERE ARE, PLACE IT IN THE
OUTLET DUCT AIR TO
DISLODGE THE OBJECT
CHECK IF THE NUT OF THE
ASSEMBLY TURBINE ISN'T
LOOSE, IF IT IS LOOSE, IT
SHOULD BE ADJUSTED, IF THE
TURBINE HAS TRASH, THIS
SHOULD BE RETIRED
CHANGE MOTOR
CHANGE MOTOR
CHANGE MOTOR
MODIFICADO MAYO 2015.
Publicidad
