Phase Linear UMP8015 Manual Del Usario página 11

UMP8015
CD PLAYER OPERATION
Repeat Play Selector (RPT)
15
During disc play, press the RPT button (15) to
repeat the playback of a desired track (S-RPT
appears on the display panel). Play of the
selected track will continue to repeat until the
Track Repeat function is cancelled by pressing
the button again or by activating the Scan or
Random play function, causing the "S-RPT"
indication to disappear. You can also cancel
Repeat Play mode by activating the Track Scan
or Random Play functions.
Random Play Mode (SHF)
16
Selector
During disc play, press the SHF button (16) to
play the tracks on the disc in a random or
shuffled order ("S-SHF" appears on the display
panel). In Random Play mode, pressing the up
or down TUNE/TRACK/SKIP buttons (6) will
select tracks in a random order instead of the
normal progression. To cancel, press the SHF
button again. The "S-SHF" indication
disappears. You can also cancel Random Play
mode by activating the Track Scan or Random
Play functions.
Disc Eject Button
23
The disc eject button (23) is located behind the
front panel, to the left of the disc slot. To access
this button, press the OPEN button (21) to allow
the front panel to fold down, exposing the disc
slot (22) and disc eject button. When this button
is pressed the disc will be ejected and the unit
will revert to radio operation. Discs may be
ejected with the vehicle ignition switch on or off.
If an ejected disc is not removed from the disc
slot within 15 seconds of being ejected, the disc
will be re-inserted automatically, and the disc
symbol will reappear on the display to show that
a disc is still installed in the unit.
NOTE: To prevent a disc from accidentally
being damaged, always remove the disc
from the unit when disc play is finished.
11