Change Admin Code; Reset; Usage - Smanos WK7000 Manual De Usuario

EN

Change Admin Code

Using admin code can wake up keypad, send Arm, Disarm, Stay
Mode commands to the control panel, and also change any settings
of the keypad.
To avoid passcode reveal, please change admin code for first time.
Change Admin Code
Enter setup state, input:
When one beep is heard and the LED indicator keeps on for 10
seconds, the setup is successful.
Note: Admin code is 6 digits; default code is "123456".
19
*7 * 0*
*8*new admin code*
*7 * 1*
*9*new admin code*
*8*neuer Benutzer-Code*
*9*neuer Admin-Code*

Reset

After reset, the user code, admin code, and other settings will
restore to default except that the connected RFID tags can still
disarm and open electronic door lock.
Enter setup state, input:
*0 * *
When one beep is heard and the LED indicator keeps on for 10
seconds, the setup is successful.

Usage

Working with an alarm control panel, the keypad is more secure
than remote control, because user code or admin code should be
input before the operation of Arm, Disarm, Stay Mode, and Mute
Mode.
EN
20