Publicidad
Enlaces rápidos
Publicidad
Manuales relacionados para Sanus WSTV1
Resumen de contenidos para Sanus WSTV1
- Página 1 INSTRUCTION MANUAL WE’RE HERE TO HELP Our US-based install experts Want to watch a video that shows are standing by to help. how easy this assembly will be? 800-359-5520 Call us at: SANUS.com/2580 Watch it now at: SANUS.com/chatSP Or, chat at:...
- Página 2 Exceeding the weight capacity can result in serious personal injury or damage to equipment! It is the installer’s responsibility to make sure the combined weight of the WSTV1 and the display does not exceed 60 lbs (27.2 kg). Use with heavier televisions may result in instability causing tip over resulting in death or serious injury! WARNING: Use this mounting system only for its intended use as described in these instructions.
- Página 3 Dimensions TV INTERFACE 600mm 400mm 23.62 in. 300mm 15.75 in. 11.81 in. 100mm 3.94 in. 300mm 200mm 11.81 in. 7.87 in. 400mm 15.75 in. 200mm 7.87 in. 3.94 in. 75mm 2.95 in. BASE PLATE TOP VIEW - EXTENDED SIDE VIEW - EXTENDED 685.8mm 5deg 27.00 in.
- Página 4 Dimensions - TV Interface 23.62 in. (600 mm) 19.69 in. (500 mm) 15.75 in. (400 mm) 11.81 in. (300 mm) 7.87 in. (200 mm) 4.00 in. (100 mm) 25.36 in. (644.16 mm) 7.87 in. 15.75 in. 17.13 in. (200 mm) (400 mm) (435 mm) 4.00 in.
- Página 5 Supplied Parts and Hardware WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer;...
- Página 6 STEP 2 Parts Hardware STEP 3 Parts Hardware STEP 4 Parts Hardware Vertical Height Adjustment Wrench Neck Bracket [21] Swivel Head Attachment Nuts [23] 1/4-20 [22] Lock Screws [19] [17] Interface Screws (Vertical Height 1/4-20 x 3/8 in. Adjustment Bracket) [24] Base 10-32 x 3/8 in.
- Página 7 STEP 1 Attach TV Brackets to TV Standard configurations 1.1 Select TV Screw Diameter 1.2 Select TV Screw Length are shown. For special applications, or if you are uncertain about your Test the three TV screw diameters (M4, [02] [03] hardware selection, contact For flat-back TVs, Spacers...
- Página 8 1.3 Attach Horizontal Brackets IMPORTANT: Remove any attached TV stands before starting! [01] [01] Position your TV brackets over your TV hole pattern - making sure the brackets are centered and level. Secure TV brackets using your screw/washer (Flat Back) or screw/washer/spacer (Round Back / Extra Space).
- Página 9 STEP 2 Attach Vertical Bracket [17] Make sure the vertical height adjustment bracket is centered on the TV. [17] with interface screws [18]. Secure vertical height adjustment bracket IMPORTANT: Ensure all brackets are securely fastened before moving on to the next step. [18] [17] [01]...
- Página 10 STEP 3 Attach Neck to Base Remove the cable cover CC by lifting up and forward. Retain cable cover CC for Step 6 (page 15).
- Página 11 [19] [20] with nuts [22]. Start by hand Complete the tightening by using supplied wrench [21]. Attach neck to base tightening the nuts [22]. CAUTION: Ensure neck [19] [20] is securely fastened to base before moving on to the next step. [21] [19] [19]...
- Página 12 STEP 4 Swivel Head to Neck [23] onto neck [19]. Secure with two lock screws [24]. Hang swivel head [23] [19] [24] [24]...
- Página 13 STEP 5 Attach TV to Swivel Head [17] Determine the position of Vertical Height Adjustment Bracket that you would like your TV to hang. Examples Highest Position Lowest Position Lowest TV Position 22 in. (558.8 mm) Highest TV Position 22 in. (558.8 mm) [23] [23]...
- Página 14 [23] Hang the TV/bracket assembly (at your desired height) onto swivel Secure the TV/bracket assembly to the swivel head with the two head [23]. (see examples Page 13) lock screws [24]. IMPORTANT: Keep the base clear while installing TV. NOTE: Leave enough space under your TV, for any accessories that you may want to place on the shelf.
- Página 15 STEP 6 Cable Management Route cables down the cable channel of the neck and through the opening in the base of the neck. Replace the cable cover CC trapping the cables behind it..
- Página 16 Adjustments Leveling Swivel Post install leveling can be adjusted ± 1.5 degrees using the TV can be swiveled ± 20° (40° total) for best viewing angle. adjustment screw AS in the swivel head [23]. ±1.5° 40° k w i s 20°...
- Página 17 Fine Tuning Tilt TV can be tilted back 5° for a better viewing angle or to compensate for deflection caused by a heavy TV. To adjust tilt, loosen both lock screws [24], adjust tilt, then tighten both lock screws [24]. 5°...
-
Página 18: Listo Para Comenzar
Exceder la capacidad máxima de peso podría causar lesiones graves o daños al equipo. Es responsabilidad del instalador asegurarse de que el peso combinado del WSTV1 y la pantalla no supere los 27,2 kg (60 lb). Utilizarlo con televisores más pesados podría provocar caídas y causar lesiones graves o incluso la muerte. -
Página 19: Paso 1 Colocar La Placa De Sujeción En El Televisor
ESPAÑOL Dimensiones Consulte la página 3 Piezas y elementos de sujeción suministrados Consulte la página 5 ADVERTENCIA: Este producto contiene piezas pequeñas que, en caso de ser tragadas, podrían causar asfixia. Antes de comenzar a montar la unidad, verifique que dispone de todas las piezas y que se encuentran en buen estado. Si no dispone de todas las piezas o alguna está... -
Página 20: Paso 1.3 Fijar Los Soportes Horizontales
ESPAÑOL PASO 1.3 Fijar los soportes horizontales Consulte la página 8 Posicione los soportes sobre el patrón de orificios del televisor y verifique que estén centrados sobre el patrón de orificios y nivelados. Fije los soportes usando su conjunto de tornillo/arandela (dorso plano) o una selección de espaciador/tornillo/arandela (dorso redondeado/espacio extra) (consulte el punto 1.2 en la página 7). IMPORTANTE: Asegúrese de que los soportes del televisor estén asegurados antes de continuar con el próximo paso. -
Página 21: Paso 6 Organización De Cables
ESPAÑOL PASO 6 Organización de cables Consulte la página 15 Pase los cables bajo el cablecanal del cuello y por la abertura situada en la base del mismo. Vuelva a colocar la cubierta de los cables CC . Ajustes Consulte la página 16 en la cabeza giratoria [23]. - Página 22 THIS PAGE LEFT INTENTIONALLY BLANK...
- Página 23 THIS PAGE LEFT INTENTIONALLY BLANK...
- Página 24 Thank you for choosing SANUS! Please take a moment to let us know how we did: Call us: 1-800-359-5520 Email us: info@sanus.com Leave a review: sanus.com UK: 0800 056 2853 Find us on Facebook: SANUS Follow us on Twitter @sanussystems Milestone AV Technologies and its affi liated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete.