Baton Klip Xtreme KSB-200 Manual De Instrucciones página 5

4. Drill pilot holes (Ø8mm) and insert the supplied anchors if installing the unit on
a concrete or brick wall.
640mm
5. Drive the supplied screws into the holes with a screwdriver, leaving 4mm of
space between the head and the wall surface.
6. Detach the base from the soundbar by rotating the plastic-head screw fixing
the metal plate to the soundbar.
7. Proceed to turn this base 180° to convert it into a wall bracket, as illustrated
below.
8. Insert the supplied washer and reattach the base on both ends of the bar.