Arrow RT90P Manual Del Usuario página 3

GENERAL POWER TOOL SAFETY WARNINGS
d)
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may result in
personal injury.
e)
pressure. Do not service power tool or disassemble with
the air hose attached. Verify that there is no residual air
pressure even after disconnecting hose. Disconnect power
tool when not in use.
f) Do not overreach – keep proper footing and
This enables better control of
power tool in unexpected situations.
g) Dress properly. Do not wear loose clothing,
accessories or jewelry. Keep your hair, clothing
and gloves away from moving parts. Loose
clothes, accessories, jewelry or long hair can be caught
in the power tool's moving parts.
h) If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
these devices can reduce dust-related hazards.
i)
of exceeding 120 psi. Over pressuring the tool may
cause bursting, abnormal operation, breakage of the
tool or serious injury to persons.
4
4. POWER TOOL USE AND CARE
a) Do not force the power tool. Use the correct
power tool for your application. The correct power
tool will do the job better and safer at the rate for which
it was designed.
b) Compressed air only. Obey the manual for the air
compressor used to power this tool.
c)
or snags. Entangled or snarled hoses can cause loss of
balance or footing and may become damaged, resulting
in possible injury.
d) Install an in-line shutoff valve. This may allow
immediate control over the air supply in an emergency,
even if a hose is ruptured.
e) Do not use the power tool if the switch does
not turn it on and off. Any power tool that cannot
be controlled with the switch is dangerous and must be
repaired.
f ) Ensure the trigger is in the off position and
disconnect from air hose and release any
adjustments, changing accessories, or storing
power tool. Such preventative safety measures may
reduce the risk of starting the power tool accidentally.
g) Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool. Power tools are dangerous
in the hands of untrained users.
GENERAL POWER TOOL SAFETY WARNINGS
h) Maintain power tools. Check for misalignment
and any other condition that may affect the
power tools operation. If damaged, have the
Many accidents
are caused by poorly maintained power tools.
i) Use the power tool, accessories and tool
nosepieces etc., in accordance with these
instructions and in the manner intended for
the particular type of power tool, taking into
account the working conditions and the work
Use of the power tool for operations
different from those intended could result in a hazardous
situation.
j) Fire the rivets into an appropriate work surface
only. The power tool is designed for use on metal objects
only and is not suitable for soft surfaces.
k)
workpiece. The rivet may split the workpiece and cause
5. MAINTENANCE
a)
repair person using only identical replacement
parts. This will help to ensure that the safety of the
power tool is maintained.
the manufacturer.
VIBRATION PRECAUTIONS
This tool vibrates during use. Repeated or long-term
exposure to vibration may cause temporary or permanent
physical injury, particularly to the hands, arms and
shoulders. To reduce the risk of vibration-related injury:
1. Anyone using vibrating tools regularly or for an extended
have regular medical check-ups to ensure medical
problems are not being caused or worsened from use.
Pregnant women or people who have impaired blood
circulation to the hand, past hand injuries, nervous
system disorders, diabetes, or Raynaud's Disease should
not use this tool. If you feel any symptoms related to
vibration (such as tingling, numbness, and white or blue
2. Do not smoke during use. Nicotine reduces the blood
vibration-related injury.
3. Wear suitable gloves to reduce the vibration effects on
the user.
4. Use tools with the lowest vibration when there is a choice.
5. Include vibration-free periods each day of work.
6. Grip tool as lightly as possible (while still keeping safe
control of it). Let the tool do the work.
7. To reduce vibration, maintain tool as explained in this
manual. If abnormal vibration occurs, stop immediately.
5