Calibration; Calibration Procedure For Scales Ms - Baxtran MS Manual De Usuario

User's Guide

11. CALIBRATION

CALIBRATION PROCEDURE FOR SCALES MS

1. Put the scale on a place free of any movement or vibration.
2. Make sure that the scale is leveled and well supported on its four bases, connect the scale to a vAC outlet.
To assure that there is any weight on the scale.
3. Turn on the scale. Some dashes appears on the display.
4. With the dashes on the screen, to press
the dashes appear again, to press the keys
5. Word "CODE" appears on the screen.
6. To write the following code: 111001. To do it, to use the keys
= 1. When finishing writing the code, confirming pressing the
7. Message ZERO appears on the screen. To assure that there is no weight on the scale. To press the key
to confirm.
8. Then the scale will start a countdown from 5 to 0. If the scale is unstable, it will display the message "MO-
TION" and the countdown will start again. This cycle will continue automatically until the scale is stable an
able to calculate the zero reference.
9. It appears the message "LOAD" on the screen, load the scale with the weight according to the table of weig-
hts of calibration. To press
10. Then the scale will start a countdown from 5 to 0. If the scale is unstable, it will display the message "MO-
TION" and the countdown will start again. This cycle will continue automatically until the scale is stable.
11. The scale will show the calibration factor during 4 seconds, then the message "OFF" will be displayed and
the scale is calibrated. Turn off the scale.
38
key. The dashes will disappear during a second. When
key to confirm.
MODEL
MS5
MS30
Check weight scale
in this same order.
and
CALIBRATION WEIGHT
5 kg
30 kg
Model MS
where = 0 and
key.