OPERATION
•
Unpack the jukebox and all accessories. Remove all protective material.
•
Connect to a household mains socket, using the supplied AC/DC adaptor (see p. 10). Press ON/OFF to
switch the device on.
•
MODE: Press MODE repeatedly to toggle the device modes FM,DAB, CD, USB, SD, BT and Phono.
•
Output volume: Use VOL+/- to adjust.
•
Line Out: If you have connected your jukebox to any external audio devices such as a PA or HiFi, use
the LINE OUT switch on the rear to activate/de-activate the audio output.
•
Setting the clock: After switching on, the display shows 00:00. Press and hold PROG for 3-5 secs.,
then use the arrow buttons to select the clock display format (12h/24h). Confirm by pressing PROG.
The first digits are flashing now. Use the arrow buttons to adjust the hour. Confirm with PROG. Repeat
the procedure for the minutes digits. Please note: The time will be re-set to 00:00 when the device
is disconnected from the mains power supply.
Completely unfold the antenna on the rear. After switching the device on, press MODE to switch to FM
mode. Use the arrow buttons to adjust the desired receiving frequency (shown on display). To save the cur-
rent station to presets, press PROG, then use the arrow buttons to select the desired preset. There is a total
20 presets available. Press PROG again, to confirm an continue.
Press the MODE button (1) until the unit is in DAB radio mode. The unit will automatically start searching for
a DAB frequency. Use the and buttons to browse through the frequencies. Press SCAN to search for
stored DAB stations (up to 20 memory locations). Press INFO to see station information.
•
Playback: Open the tray (OPEN/CLOSE) and Insert a CD into the tray with the printed side facing up.
Use the buttons PLAY/PAUSE, NEXT/BACK and STOP to operate the playback.
•
Play mode: Press REP repeatedly to toggle the modes REP1 (repeat current track), REP (repeat all
12
Connection
Basics
Radio
DAB radio
CD