MACAP M7D Serie Manual De Instrucciones página 15

6 SAFETY INFORMATION
This appliance has been designed exclusively for grinding coffee beans, consequently the manufacturer will not be held
liable for any damage or incidents that are caused if it is used for any other purpose.
The warranty will be automatically invalidated in the event the appliance is used improperly. Only qualified operators must
install the appliance or carry out any technical maintenance work.
The appliance is not waterproof and must be kept well clear of any potential water sprays or very damp areas.
The appliance has been designed for professional and not home use, and therefore must only be used by trained personnel.
The appliance must not be used by children, or by adults with reduced physical, mental or motor capacities, nor by anyone
without sufficient experience or knowledge, unless they receive specific training or use the appliance under the supervision
of a trained person.
keep the appliance out of the reach of children.
Children being supervised not to play with the appliance.
The appliance has a thermal circuit breaker for the motor, when it triggers and stops the grinder, unplug the appliance at the
mains and wait at least one hour before turning it back on again.
If the power cable is damaged it must be replaced by the manufacturer or by the technical assistance service, or at any rate
by a person with similar qualifications, so as to prevent all risks.
UNPLUG THE APPLIANCE AT THE MAINS BEFORE CARRYING OUT ANY MAINTENANCE OR CLEANING WORk.
7 INSTALLATION AND ELECTRICAL CONNECTIONS
Installation must be carried out by trained technical personnel.
Installation must be carried out in strict compliance with the safety provisions currently in force in the country of use, with
particular reference to the accident and fire prevention regulations and electricity authority regulations.
Place the appliance on a flat surface to ensure it is perfectly stable. Before
connecting the appliance to the mains:
- align the hole of the bell with one of the holes of the adjusting ring-nut
(see figure F1). Check that the fan does not prevent lowering the adjustment
disc stopper pin, otherwise change the hole.
Fasten, using the appropriate screw.
- make sure the switch is off (position 0) and that the voltage and
frequency data given on the data plate are commensurate with that of
the mains supply.
The power cable must be connected to the ground plate, which must be
perfectly efficient and in compliance with current safety regulations.
8 APPLIANCE FUNCTIONS
Once the coffee hopper is placed firmly on the upper grinding blades holder, pour in the coffee beans.
Put the lid on the coffee hopper and open the fan, to allow the coffee beans to flow into the grinder.
Do not turn the appliance on without the coffee hopper or without its lid.
To start the appliance, press the main switch (position 1). At night or when operators are absent, turn off the switch.
- In Standard mode, press the select button to scroll through the menu. When the required dose is displayed, press the
dosing button to start the grinding process.
F1
15
ENGLISH