MACAP M7D Serie Manual De Instrucciones página 18

9-4 DOSE COUNTER (NO. 12345)
The appliance is equipped with a function to control the number of doses for timed functions.
Scroll through the programming menu by turning the select button. When the wording "N° 12345" appears on the display,
press it to enter the display. The letter "P" indicates the partial dose, whereas "T" indicates the total dose.
Turn the select button to switch from one dose counter function to another (Dose No.1, Dose No.2 and Dose No.3).
The partial dose counters can also be reset by holding down the control disc for 10 sec. or until the value "0" appears on the
display. Select "Exit" to leave the Dose Counter function and return to the programming menu.
9-5 PASSwORD
The Password is a function that prevents access to unauthorised personnel.
Scroll through the programming menu by turning the select button. When the wording "Password" appears on the display,
press it to enter. The cursor will flash above the first digit to be entered. Press the select button to start setting the password.
After each digit has been set by turning the select button, press it to move on to the next digit.
Once the fourth digit has been set, the wording "Save" will flash. Confirm "Save" to save the password and exit, or turn to
"Exit" to exit without saving and return to the programming menu. If you select "Save" without having set the four digits,
the function will close without saving. The password can be renewed by setting "----" and then saving as confirmation.
When a Password is set, it will be requested at every attempt to access the programming menu.
If the wrong Password is inserted, the wording "ERROR!" will appear on the display.
9-6 DATA
The programming menu can store a date that can be changed.
Scroll through the programming menu by turning the select button. When the wording "DD/MM/YYYY" appears, press it
to enter. The cursor will flash above the first digit to be entered. Press the select button to start setting the date. After each
digit has been set by turning the select button, press it to move on to the next digit.
Once the date has been set, the wording "Save" will flash. Confirm "Save" in order to save the date and exit or turn to "Exit"
to exit without saving and return to the programming menu.
9-7 RELEASE
The programming menu can also display the software version used by the coffee grinder. This information can be obtained
from the technical service centre in the event of operating faults.
10 MAINTENANCE
Only trained personnel must carry out the maintenance work. If, during maintenance, any worn components need changing,
only original spare parts must be used.
11 CLEANING
ALWAYS UNPLUG THE APPLIANCE FROM THE MAIN SWITCH BEFORE CLEANING.
DO NOT PLACE THE APPLIANCE IN WATER. DO NOT USE ANY ABRASIVE PRODUCTS AS THEY COULD DAMAGE THE SURFACE
OF THE GLOSSY PARTS ON THE APPLIANCE.
Removable plastic parts
Detach all removable parts from the appliance (lid, coffee beans hopper, drip tray, etc.) and wash them in water and mild
detergent (never clean them in a dishwasher).
18
ENGLISH