Troubleshooting; Service Information - Black+Decker LHT2220 Manual De Instrucciones

PROBLEM
Slow running, noisy or hot blades.
Unit will not start.
Battery packwill not charge.

SERVICE INFORMATION

BLACK+DECKER offers a full network of company-owned and authorized service locations. All BLACK+DECKER
Service Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service.
For more information about our authorized service centers and if you need technical advice, repair, or genuine factory
replacement parts, contact the BLACK+DECKER location nearest you, or visit us at www.BlackandDecker-la.com

TROUBLESHOOTING

POSSIBLE CAUSE
Dry, corroded blades.
Blades or blade support bent.
Bent or damaged teeth.
Loose blade bolts.
Battery pack not installed properly.
Battery pack not charged.
Attachment is not secured.
Battery pack not inserted into charger.
Charger not plugged in.
Surrounding air temperature too hot
or too cold.
ENGLISH • 29
POSSIBLE SOLUTION
Lubricate blades.
Straighten blade or blade support.
Straighten teeth.
Tighten blade bolts.
Check battery pack installation.
Check battery pack charging requirements.
Make certain the attachment is fully pushed
into the Power Unit.
Insert battery pack into charger until green
LED appears.
Plug charger into aworking outlet. Refer to
"Important Charging Notes" formore details.
Move charger and battery pack to
a surrounding air temperature of above 40°F
4,5°C) or below 105°F (+40,5°C).