Troubleshooting - Black+Decker LHT321 Manual De Instrucciones

Two-year lIMITed HoMe
uSe warranTy
BLACk+DECkER warrants this product for
two years against any defects in material or
workmanship. The defective product will be
replaced or repaired at no charge in either
of two ways.
The first, which will result in exchanges
only, is to return the product to the retailer
from whom it was purchased (provided that
the store is a participating retailer). Returns
should be made within the time period of the
retailer's policy for exchanges (usually 30 to
90 days after the sale). Proof of purchase may
be required. Please check with the retailer for
their specific return policy regarding returns
that are beyond the time set for exchanges.
The second option is to take or send the
product (prepaid) to a BLACk+DECkER
owned or authorized Service Center for
Problem
• Slow running, noisy or
hot blades.
• Unit will not start.
• Battery won't charge.
• Blades jammed on
branch.
For assistance with your product, visit our website www.blackanddecker.com for the location
of the service center nearest you or call the BLACk+DECkER help line at 1-800-544-6986
Imported by
Black & Decker (U.S.) Inc.,
701 E. Joppa Rd.
Towson, MD 21286 U.S.A.

TrouBleSHooTInG

Possible cause
• Dry, corroded blades.
• Blades or blade
support bent.
• Bent or damaged teeth. • Straighten teeth.
• Loose blade bolts.
• Battery not installed
properly.
• Battery not charged.
• Lock off not fully
operated.
• Battery not inserted
into charger.
• Charger not plugged in. • Plug charger into a working
• Surrounding air
temperature too hot or
too cold.
• Blade unable to cut
through thick branch.
10
repair or replacement at our option. Proof of
purchase may be required.
This warranty does not apply to accessories.
This warranty gives you specific legal rights
and you may have other rights which vary
from state to state or province to province.
Should you have any questions, contact the
manager of your nearest BLACk+DECkER
Service Center. This product is not intended
for commercial use.
free warnInG laBel rePlaceMenT:
If your warning labels become illegible or
are missing, call 1-800-544-6986 for a free
replacement.
laTIn aMerIca: This warranty does not
apply to products sold in Latin America. For
products sold in Latin America, check country
specific warranty information contained in the
packaging, call the local company or see the
website for warranty information.
Possible Solution
• Lubricate blades.
• Straighten blade or blade support.
• Tighten blade bolts.
• Check battery installation.
• Check battery charging
requirements.
• Check that lock-off is fully pressed
down prior to moving main trigger.
• Insert battery into charger until
green LED appears. Charge up to
8 hours if battery totally drained.
outlet. Refer to "Important Charging
Notes" for more details.
• Check current at receptacle by
plugging in a lamp or other appliance.
• Check to see if receptacle is
connected to a light switch which
turns power off when you turn out
the lights.
• Move charger and tool to a
surrounding air temperature of
above 40 degree F (4.5°C)
or below 105 degree F (+40.5°C).
• Depress the POWERCUT
to cut through the branch.
button
TM